ANVIL® 260 Series 1/2 inch Carbon Steel Adjustable Clevis Hanger, Hot-Dip Galvanized

Description

Clevis Hanger, Type: Adjustable, Nominal Size: 1/2 inch, Rod Size: 3/8 inch, Adjustment: 5/8 inch, Span: 7 ft, Lower Width: 1 inch, Material: Carbon Steel, Finish/Color: Zinc Plated (Hot-Dip Galvanized), Maximum Load: 610 lb, Bottom of Pipe to Top of Hanger: 2-11/16 inch, Center of Pipe to Top of Hanger: 2-3/16 inch, Temperature Rating: 450 Deg F, Installation: Nut, Center of Pipe to Bottom of Hanger Rod: 1-1/2 inch, Standards/Approvals: Complies with Federal Specification A-A-1192A (Type 1), WW-H-171-E (Type 1), ANSI/MSS SP-69 and MSS SP-58 (Type 1), cULus Listed, FM Approved

Features

• Design has yoke on outside of lower U-strap so yoke cannot slide toward center of bolt, thus bending of bolt is minimized
• Sizes 5 inch and up have rod and 2 nuts instead of bolt and nut, thread length on clevis rod is such that the thread locks the nuts in place, and threads are not in shear plane
• Recommended for the suspension of stationary pipe lines
• Hanger load nut above clevis must be tightened securely to assure proper hanger performance
• Vertical adjustment without removing pipe may be made from 3/8 inch through 5-1/8 inch, varying with the size of clevis. Tighten upper nut after adjustment

Resources