ANVIL® 260 Series 0500359518 Adjustable Clevis Hanger, 1 in Pipe, 3/8 in Rod, 730 lb Load, Steel, Hot-Dipped Galvanized thumbnail 1

Anvil®Clevis Hangers

ANVIL® 260 Series 0500359518 Adjustable Clevis Hanger, 1 in Pipe, 3/8 in Rod, 730 lb Load, Steel, Hot-Dipped Galvanized

Mfg Part #: 0500359518

Part #: A260GH

Sold As: 1/Each

CPN: Add CPN

Email counter Request quote

Specifications

ManufacturerASC Engineered Solutions

BrandAnvil®

Mfg Part #0500359518

Part #A260GH

Sold AsEach

Package Qty0

Min Order Qty1

Weight0.0

Standards/ApprovalsANSI/MSS SP-69/MSS SP-58 (Type 1)|Federal Specification A-A-1192A (Type 1)/WW-H-171-E (Type 1)|FM Approved|UL/ULC Listed

ApplicationFor suspension of stationary pipe lines

Description

ANVIL® Adjustable Clevis Hanger, 260 Series, 1 in Pipe, 3/8 in Rod, 730 lb Load, Steel, Finish: Hot-Dipped Galvanized, For Use With: 1/2 to 30 in Pipes, Additional Information: 7 ft Span, 450 deg F Maximum Temperature Rating

Features

Design has yoke on outside of lower U-strap so yoke cannot slide toward center of bolt, thus bending of bolt is minimized
Sizes 5 in and up have rod and two nuts instead of bolt and nut, thread length on clevis rod is such that the thread locks the nuts in place and threads are not in shear plane
Hanger load nut above clevis must be tightened securely to assure proper hanger performance
Vertical adjustment without removing pipe may be made from 3/8 in through 5-1/8 in, varying with the size of clevis
Tighten upper nut after adjustment