AQUA-PURE™ AP100 Series 016145-00111 Water Filtration System, 10 gpm, NPT, 25 to 100 psi

Description

AQUA-PURE™ Water Filtration System, AP100 Series, 3/4 in Connection, NPT Connection, 10 gpm Flow Rate, Odor, Particulate, Rust, Taste Contamination Removal, 25 to 100 psi, Bracket Mounting, 40 to 100 deg F, 11.58 cm Dia x 34.76 cm L x 34.76 cm H

The AQUA-PURE™ plastic whole house water filtration system reduces sediment and other contaminants (cartridge dependent) to help provide cleaner, clearer water from the water used throughout your entire home. The 3M™ AQUA-PURE™ water filter system is a whole house water filtration solution for larger homes and commercial units. It helps reduce particulate, rust and the taste and odor of chlorine from cloudy, colored or musty water. This simple canister filter system uses standard size filtration cartridges. A built-in pressure relief button makes cartridge changes simple. By helping improve the clarity, taste and odor of tap water, it provides an economical alternative to bottled drinking water. The simple to install system handles a heavy load, providing a flow rate of up to 45 gpm. The system is covered by a 10 year limited warranty against manufacturing defects. Manufactured by 3M™ Purification Inc., formerly CUNO Incorporated, the AQUA-PURE™ AP802 water filter system is installed at the point of entry. The single canister unit is installed with 1 in NPT inlet and outlet connections. All parts are manufactured from FDA CFR-21 Compliant materials. The system provides a flow rate of up to 45 gal (170.3 L) per minute and has an operating pressure range of 25 to 100 psi (172 to 690 kPa) and operating temperature range of 40 to 100 deg F (4.4 to 37.8 deg C). It comes with a mounting bracket and wrench. A pressure relief button is incorporated into the system for ease in cartridge replacement. 3M™ recommends regularly scheduled maintenance. Cartridges must be replaced every six months or sooner if there is a noticeable reduction in flow rate. If water is microbiologically unsafe or of unknown quality adequate disinfection should be used before or after the water filtration system. Whole house water treatment systems are sometimes referred to as point of entry (POE) systems and are installed immediately downstream from the water meter or well pump. A whole house filter that reduces iron, particulate and chlorine odor and taste will typically treat all water entering a residence, protecting plumbing and fixtures while reducing unpleasant tastes, colors and odors. A water softener system will often be bypassed by a cold drinking water line that provides salt-free drinking water. Regular maintenance of a whole house water filter system may be as simple as replacing a filtration cartridge every six months or may require a service call. The initial expense of a whole house water filter system often pays off in the long term, as it may protect pipes and fixtures from iron and/or hard water deposits and discoloration and provide savings in bottled water costs.

Features

• Flow rate of up to 10 gpm for homes and commercial units, using the AP420 filter cartridge
• Built-in pressure relief for easy cartridge replacement
• Point of entry installation for whole home filtration
• Efficiently reduces chlorine taste and odor

Resources

No product resources were supplied for this item.