Cascade Waterworks CSWRT-09.05-06 RC Sewer Saddle Tee, 9 in, 6 in Inlet, 9.05 in OD Pipe, T304 Stainless Steel

Description

Cascade Waterworks Sewer Saddle Tee, 9 in Nominal, 6 in Inlet, 9.05 in Pipe Outer Diameter, Material: T304 Stainless Steel, 5/8 in Bolt, 18-8 Stainless Steel Bolt, For Use With: Rubber Coupling

Sewer saddles shall be of two-piece construction. The top shell section shall be a minimum of 14 ga and shall be made from T304 stainless steel, in accordance with ASTM A240 and have a Branch Inlet attached to the Top shell with an outside seam MIG weld. The branch inlets shall be configured to accept a branch line at a 90 deg angle to the main line for style CSWRT. The back shell section shall be a minimum of 18 ga and shall be made from T304 stainless steel, in accordance with ASTM A240. These saddles shall have a minimum of one stud/receiver assembly per side. The saddle shall mount to the mating main line. Branch inlets shall be T304 stainless steel, in accordance with ASTM A240, with a length sufficient for use with a non-shear rubber coupling (not included). Bolts and nuts shall be 5/8 UNC, 18-8 stainless steel. Nuts shall be coated with a fluoropolymer coating to prevent galling. Washers shall be nylon and 18-8 stainless steel. Main line gasket shall be a gridded mat, with tapered ends and an opening for the branch line. Gasket shall be virgin SBR, grade 30 in accordance with ASTM D2000 and suitable for sewer service. All weldments shall be fully chemically passivated in accordance with ASTM A380.

Features

• All stainless steel design
• Large branch-side Mat Gasket provides strong seal as well as preventing saddle migration on main line
• Long saddle for mainline support
• Inlet branch sized for use with a non-shear flexible coupling (not included)

Resources