Cleanfit 70887 Tape, 0.0035 in Thick, 1 in W, 1429 in L, Blue, PTFE, 0.8 g/cc Density

Description

Cleanfit Tape, 0.0035 in Thickness, 1 in Width, 1429 in Length, Blue, PTFE, 10000 psi, Density: 0.8 g/cc, 15 N/sq-mm Tensile Strength, -400 to 500 deg F

Blue Monster PTFE Thread Seal Tape is a thicker, denser, general-purpose thread seal tape that comes in a monstrous 1,429" roll. That's 5 times more tape than conventional rolls of low-density thin tapes. Fewer wraps are necessary to affect a leak-proof seal and it applies easily. No waste and no re-taping make sealing joints a breeze. Now available in a smaller roll, Mini-Monster PTFE thread sealant tape. Blue Monster thread sealing tape is manufactured from PTFE resin, a polymer consisting of recurring tetrafluoroethylene monomers whose formula is (CF2-CF2)n. It is inert and compatible with a very wide range of materials. Use Blue Monster on threads made from galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, polypropylene, PVC, CPVC, ABS, fiberglass and more.

Features

• Compatible with a broad range of gases and liquids
• Compatible with a broad range of piping materials will not harden or crack on the joints
• Effective across a broad range of temperatures and pressures
• Acts as a thread lubricant and anti-seize
• Prevents electrolytic corrosion of threads
• No curing time
• Unlimited shelf life
• Non-flammable
• 99.6% PTFE less than 0.4% composition
• Greater than 100% elongation
• Mill-Rose blue monster thread sealing tape has been used to seal fittings carrying water and oil at pressures up to 10000 lb/sq-in or 69000kPa
• Temperature range - 450 to 500 deg F PTFE is completely stable up to 500 deg F
• Decomposition is slow upto 750 deg F
• Although decomposition will occur on contact with naked flames
• Note-pressure ratings are relative to the quality and torque of the fittings and the amount of tape used

Resources