2 inch Resilient Wedge Full Open Gate Valve, FIP x FIP

Description

Gate Valve, Resilient Wedge, Full Open, Nominal Size: 2 inch x 2 inch, Threaded x Threaded Connection, Pressure Rating: 250 psi, Open Left Gate, Resilent Seat, Rubber O-ring Seal, Non-Corrosive Copper Alloy Stem, Fusion Bonded Epoxy Coated Bonnet, Flow (Cv): 300, Standards: AWWA C509, NSF 61 Certified, Additional Details: Tensile Strength: 65000 psi | Yield Strength: 45000 psi | Elongation: 10 to 12% | No. of Turns to Full Open: 6-1/2, Dimensions: A: 7 inch, B: 3-1/4 inch, D: 5-3/8 inch, E: 10-7/8 inch, P: 3 inch, Q: 10 inch, R: 12 inch, S: 7-1/4 inch

Features

• Two O-ring seals are replaceable with the valve fully open and subjected to full-rated working pressure
• Smooth, unobstructed waterway is free of pockets, cavities and depressions allowing for minimal flow loss and lower pumping costs. All valves accept full size tapping cutter
• Pads on the bottom of all valves keep valve in upright position for easier storage and protection from the elements
• O-ring seals at stuffing box and bonnet to body flanges to ensure the best possible seal. No flat gaskets
• Long, trouble-free life with high strength, non-corrosive copper alloy stem and stem nut
• Hole design on mechanical joint connection eliminates the need for anti-rotation bolts
• Delrin thrust bearings above and below the thrust collar reduce friction and minimize operating torques
• Clow corrosion-resistant fusion-bonded epoxy coating, conforming to AWWA C550 and NSF 61 Certified, protects both inside and outside of valve
• 304 stainless steel nuts and bolts provide long-life corrosion protection
• 100% coated wedge ensures bubble-tight seal every time up to 250 psi. With twin seal design

Resources

No product resources were supplied for this item.