Dryerbox® Model DB-425 22 ga Steel Dryer Vent Box, 12-1/2 inch L x 5-1/8 inch W x 21 inch H

Description

Dryer Vent Box, Upward Flow Exhaust Direction for 2x6 Framing, Material Specification: 22 ga. Steel, Aluminized Finish, Overall Measurements: 12-1/2 inch Length, 5-1/8 inch Width, 21 inch Height, Inside Measurements: 9-1/2 inch W x 18-1/4 inch H, Distance From Nailing Flange to Rear of Box: 4-1/4 inch

Features

• The 425 is the flagship model having been designed for the most common new construction dryer exhaust configuration. While there are a few exceptions, it is primarily used for venting upward in 2 X 6 walls. Where wall depth is restricted, it can be installed in a 2 X 4 wall with a 1" furring strip. The only time the 425 should be rotated is to support pedestal or stacked units for downward venting. This model was designed to allow room for other mechanical components in the cell of the wall. It is narrow enough to share plumbing or electrical runs.

Resources