EWC® 20X8 ND Motorized Damper With MA-ND5 Actuator, 20 x 8 in, Aluminum, Rectangular

Description

EWC® Motorized Damper, Model: ND, 20 x 8 in, 24 VAC/VDC, 50/60 Hz, 1 W, VA Rating: 1.5 VA, Parallel Blade, Aluminum, Duct Mounting, Spring Motor, Rectangular Shape, 3-Wire Electrical Connection, 1500 fpm Rated Velocity, 35 s Timing Range, 18 in-lb Torque, Up to 1.5 in-WC

The ND Series of ultra-zone dampers was designed with the installer and homeowner in mind. This damper is easy-to-install and easy to checkout. The LED display allows the installer to visually check the damper operation. With a sturdier frame, the damper installs in the duct much faster and easier and the nylon bushings insure quieter operation. This is a feature that homeowners will never hear about quieter operation and a longer life motor equals NO call backs.

Features

• The ND damper is constructed using heavy-duty 0.8 in extruded aluminum
• Nylon bearings for quiet operation
• Overlapping parallel blade design
• Reliable operation up to 1.5 in-WC and 1500 fpm duct velocities
• The UL Listed motor actuator
• 24 VAC 3-wire power open/power close or floating function
• The motor actuator is rated at 18 in-lb of torque, superior to low torque spring-type motors
• The motor actuator housing is rated NEMA 1
• Integrated end stop adjustment allows a percentage of relief air (leakage) when the damper is powered closed
• You may set a maximum open position as well, which is useful during test and balancing procedures
• Bright green and red LED's indicate damper open and closed position

Resources