Fieldpiece 9V Alkaline Huge Backlit Dual Display Wireless Clamp Meter

Description

Clamp Meter, Type: Wireless, Voltage Rating: 9V, Battery Type: Alkaline, Accuracy: +/- 9 Deg F at 73 Deg F, <75% RH, Display Type: Backlit, Dual, Temperature Rating: 32 to 122 Deg F (Operating), -4 to 140 Deg F (Storage), Counts: 10000, Battery Life: 100 hr, Size: 79.5 mm W x 50 mm D x 287.5 mm H, Includes: ADLS2 Deluxe Test Lead Set with Gold Plated Tips with Removable Sheath, ASA2 Alligator Clips, (2) ATB1 Type K Thermocouples, (2) Velcro Straps, 9V Alkaline Battery (Not Installed), ANC7 Padded Case, Operator's Manual, Measurement Rate: 3.3 times per sec Nominal, Auto Power Off: 30 min, Altitude: Up to 6562 ft, Overload Protection: 600VDC or 600VAC RMS

Features

• Swivel head with LED flashlight - open the clamp to illuminate the wire bundle you're hunting. Rotate the clamp 180 Deg to see the display easier. The clamp's claw grabs the wire you want to measure
• Electrical testing for HVACR - True RMS readings through the clamp or leads, capture starting amps with Inrush
• Test 3-phase power test - Conveniently test phase rotation without carrying around an extra meter or extra lead, with the included alligator test lead connected to L1 you can determine phase rotation with one hand
• Trusted dual-temp - reliable temperature in fast changing environments
• Huge backlit display - view 2 measurements so large you can read them at a distance and in the dark
• Rugged dual display - broad temperature range tolerance allows for testing in freezers and on rooftops
• Capacitance - test motor start and run caps, determine when a capacitor needs to be replaced
• Send measurements to the Job Link Mobile App via JL2 transmitter, or view measurements from other compatible tools
• Magnetic hanger - hanging strap flips out to keep the meter locked in place
• Probe storage - snap the leads into the back of the meter, no more tangles or probe tip pricks
• Dial backlight - view the dial in low light
• Safety and convenience - use non-contact voltage to check if the wire is hot or not, use the probe holder on the clamp to test voltage more safely with one hand. Test voltage hands-free using the magnetic hanger
• Approximately 30 min auto power off
• 3-phase rotation testing with 2 leads
• Record motor start up with inrush current
• Non-contact voltage and one handed testing
• Swivel head, lead storage and jaw light

Resources

No product resources were supplied for this item.