Honeywell ARD16 Motorized Damper, 16 in, 22 ga Steel, Galvanized, Round

Description

Honeywell Motorized Damper, 16 in Size, 24 VAC, 60 Hz, 6 V-A VA, Single Blade, 22 ga Steel, Galvanized, Side/Top Mounting, Power Closed, Spring Open, Reversible Motor, Round, 1 in WC Pressure, 40 - 140 deg F Ambient, Motor: 3-1/2 in W x 3 in H x 2-3/8 in D

Features

• Automatic round damper power-close, spring-open models ensure low leakage while controlling circulating air in heating, cooling and ventilation systems
• Galvanized steel with single-blade damper, which closes off tightly against gasket for minimal leakage
• Designated as power closed/spring return open damper for use with Honeywell zoning systems
• Can be field-converted when used as an independent zone or for fresh air intake
• Rated to operate up to 1 in WC
• Blade closes off tightly against gasket for minimal leakage
• Male (crimped) and female (uncrimped) ends to connect to any rigid or flexible round duct
• 4 in lead wire motor electrical connection
• 90 deg motor nominal angular rotation
• Minimum 60 in-oz motor torque
• Nominal motor timing at 77 deg F ambient: energized at rated load - 30 sec, de-energized (spring return) - 10 sec
• Less than 1% at 1/2 in WC leakage
• Pressure drop: maximum at full open: 0.0329 in WC at 800 ft/min
• Motor shaft rotation direction clockwise, when energized and viewed from the base or shaft end
• Motor-mounting means direct connection to damper shaft
• Motor-mounting position multi-poise

Resources