Pass & Seymour 2095 2-Pole 3-Wire GFCI Duplex Receptacle, 20A, 125V, 5-20R, WD-1, WD-6, Gray

Description

GFCI Duplex Receptacle, 4.2 inch H x 1.72 inch W x 0.98 inch D, 10 - 14AWG Wire, 20A Amperage Rating, 125V Voltage Rating, Back Wired Terminal Connection, 2 Poles, 3 Wires, Temperature Rating: -35 to 66 Deg C, Thermoplastic Nylon, Gray, 1500V Dielectric Strength, Wall Mount, Environmental Conditions: Meets V-2 per UL 94 Requirements, Nema Rating: 5-20R, WD-1, WD-6, Standards: UL 943, 498, CSA Standard: C22.2 No. 42, 144, CUL E42190, Fed Spec Number: WC596, Rohs Complaint

Features

• SafeLock™ Protection: if critical components are damaged and ground fault protection is lost, power to receptacle is disconnected
• Prevents line-load reversal miswire: no power to the face or downstream receptacles if wired incorrectly
• Exceeds UL943 voltage surge requirements; survives 100x the required UL 3kA/6kV voltage surge test cycles
• FSUL Listed (Federal Specification WC596)
• Backed by written warranty
• Side or internal screw-pressure-plate back wire with #10 – #14 AWG solid or stranded copper wire
• Two back wire holes per terminal
• Ground screw has a back wire clamp for easy installation
• 1/4" thinner than competitors’ GFCIs; leaves more room for wires in the box
• Mounting screws are shipped captive in the device and wall plate for easier installation
• High-impact-resistant thermoplastic construction
• Extra-long strap
• Button colors match the device face
• Dual-direction test and reset buttons
• Class A rated GFCI
• Supplied with matching TP26 nylon wall plate
• Tri-drive screws

Resources

No product resources were supplied for this item.