Pass & Seymour 2095TR 2-Pole 3-Wire Tamper-Resistant GFCI Decorator Receptacle, 20A, 125V, 5-20R, WD-1, WD-6, Light Almond

Description

GFCI Decorator Receptacle, Tamper-Resistant, 4.2 inch H x 1.72 inch W x 1.13 inch D, 10 - 14AWG Wire, 20A Amperage Rating, 125V Voltage Rating, 2 Poles, Temperature Rating: -35 to 66 Deg C, High Impact-Resistant Thermoplastic, Light Almond, 1500V Dielectric Strength, Environmental Conditions: Meets V-2 per UL 94 Requirements, Nema Rating: 5-20R, WD-1, WD-6, Standards: UL 943, 498, CSA C22.2 No. 42, 144, CUL E42190, Fed Spec Number: WC596, Rohs Complaint

Features

• Stylish rounded corners match Signature wall plates and devices
• Tamper-resistant models have dual mechanical shutter system to help prevent insertion of foreign objects
• Sealed nightlight with high impact-resistant Lexan® lens prevents tampering
• Nightlight uses cooler LED illuminationPhotocell turns nightlight ON in dark, OFF in daylight SafeLock™ Protection: if critical components are damaged and ground fault protection is lost, power to receptacle is disconnected
• FSUL Listed (Federal Specification WC596)
• Trip indicator light (red LED)
• Prevents line-load reversal miswire: no power to the face or downstream receptacles if wired incorrectly
• Exceeds UL943 voltage surge requirements; survives 100x the required UL 3kA/6kV voltage surge test cycles
• Mounting screws are shipped captive in the device and wall plate for easier installation
• High-impact-resistant thermoplastic construction
• Zinc-plated steel mounting strap
• Button colors match the device face
• Dual-direction test and reset buttons

Resources

No product resources were supplied for this item.