M&H Valve 8 inch Resilient Wedge Post Indicator Valve, 4067-01P, Mechanical Joint

Description

Gate Valve, Resilient Wedge, Post Indicating, Full Open, Style 4067 Series, Nominal Size: 8 inch x 8 inch, Mechanical Joint x Mechanical Joint Connection, Pressure Rating: 250 psi, Iron Body, Styrene Butadine Rubber Seat, O-Ring Seal, Non-Corrosive Copper Alloy Stem, Fusion Bonded Epoxy Coated Bonnet, Actuation/Operator: Electric Motor, Flow (Cv): 6700, Standards: AWWA C509, NSF 61 Certified, Construction: Epoxy Coating Inside and Out, Additional Details: Tensile Strength: 65000 psi | Yield Strength: 45000 psi | No. of Turns to Full Open: 25-1/2, Dimensions: A: 11-1/2 inch, B: 8-1/8 inch, C: 8-1/2 inch, E: 22-1/2 inch, G: 5-5/8 inch, H: 9-3/4 inch, P: 5-1/2 inch, Q: 37-3/4 inch, R: 29-1/4 inch, S: 14 inch, U: 10-3/4 inch, V: 13-1/4 inch

Features

• Two O-ring seals are replaceable with the valve fully open and subjected to full-rated working pressure
• Smooth, unobstructed waterway is free of pockets, cavities and depressions allowing for minimal flow loss and lower pumping costs. All valves accept full size tapping cutter
• Pads on the bottom of all valves keep valve in upright position for easier storage and protection from the elements
• O-ring seals at stuffing box and bonnet to body flanges to ensure the best possible seal. No flat gaskets
• M&H corrosion-resistant fusion-bonded epoxy coating, conforming to AWWA C550 and NSF 61 Certified, protects both inside and outside of valve
• Long, trouble-free life with high strength, non-corrosive copper alloy stem and stem nut
• Hole design on mechanical joint connection eliminates the need for anti-rotation bolts
• Delrin thrust bearings above and below the thrust collar reduce friction and minimize operating torques
• 304 stainless steel nuts and bolts provide long-life corrosion protection
• 100% coated wedge ensures bubble-tight seal every time up to 250 psi. With twin seal design

Resources

No product resources were supplied for this item.