M&H Valve 2 inch Resilient Wedge Gate Valve, Open Right, 4067-07, Threaded x Threaded

Description

Gate Valve, Resilient Wedge, Full Open, 7000 Series, Nominal Size: 2 inch x 2 inch, Threaded x Threaded Connection, Pressure Rating: 250 psi, Open Right Gate, Ductile Iron Body, Styrene Butadine Rubber Seat, Bubble Tight Seal, Non-Corrosive Copper Alloy Stem, Fusion Bonded Epoxy Coated Bonnet, Actuation/Operator: Electric Motor, Flow (Cv): 300, Standards: AWWA Standard C515, NSF 61 Certified, ASTM D429, Construction: Epoxy Coating Inside and Out, Additional Details: Tensile Strength: 65000 psi | Yield Strength: 45000 psi | Elongation: 12% | Limited Warranty: 10 Year

Features

• Two O-ring seals are replaceable with the valve fully open and subjected to full-rated working pressure
• Smooth, unobstructed waterway is free of pockets, cavities and depressions allowing for minimal flow loss and lower pumping costs. All valves accept full size tapping cutter
• Pads on the bottom of all valves keep valve in upright position for easier storage and protection from the elements
• O-ring seals at stuffing box and bonnet to body flanges to ensure the best possible seal
• Long, trouble-free life with high strength, non-corrosive copper alloy stem and stem nut
• Hole design on connection eliminates the need for anti-rotation bolts
• Delrin thrust bearings above and below the thrust collar reduce friction and minimize operating torques
• Clow corrosion-resistant fusion-bonded epoxy coating, conforming to AWWA C550 and NSF 61 Certified, protects both inside and outside of valve
• 304 stainless steel nuts and bolts provide long-life corrosion protection
• 100% coated wedge ensures bubble-tight seal every time up to 250 psi. With twin seal design

Resources

No product resources were supplied for this item.