Philmac® 3G™ 75-1498 End Cap, 2 in, 2 in, Compression, Thermoplastic, 230 psi, 4.1 in L x 3.7 in W

Description

Philmac® End Cap, 2 in, 2 in, Compression Connection, Thermoplastic, 230 psi, 4.1 in L x 3.7 in W

Featuring Philmac's unique slide and tighten technique, 3G compression fittings for CTS HDPE pipes make installation simple. In addition they offer a high integrity 230 psi rated connection and with no corrosion or lead risk. Connections are available from 3/4 to 2 in.

Features

• The body flange on the CTS compression fitting acts as a visual stop to indicate when the nut is tightened, there is no benefit in further tightening the nut
• The fitting has been designed to minimize pipe twist as the nut is tightened, pipe twist can impact on not only the connection you have just made but also on the connection at the other end of the line
• Installation could not be easier, simply insert the pipe into the fitting until the first point of resistance and then tighten the nut up to the flange of the fitting body
• Philmac 3G CTS fittings are made for permanent, high-security joints, however if the need arises, the range allows joints to be re done
• Philmac CTS compression fittings are CSA and NSF 61 approved for potable water use
• The size of the Philmac CTS compression fitting has been kept to a minimum, making the fitting ideal to be used in confined areas
• If the nut is loosened there is no danger of losing components, as the collet and seal are retained in the body of the fitting, losing components in the trench becomes a thing of the past
• There is no need for cumbersome, expensive equipment or access to power, there is also no need to prepare the pipe in any way, simply cut the pipe square and then slide it into the fitting. The only tool required is a standard wrench to tighten the nut
• 3G CTS Series fittings are made for advanced, lightweight thermoplastics to provide a 50 year in service lifetime at standard operating conditions, in addition the fittings, unlike metal components provide a high degree of corrosion resistance

Resources