QuickProducts QwikLug QT2910 Compressor Terminal Repair Kit, 10 AWG, 4 ft

Description

Compressor Terminal Repair Kit, QwikLug™, Includes Wire Nuts and Tree Screw-Tight Connectors with 2 ft or 4 ft Lead Wires, Spades Tightens from the Front with a Screwdriver, Dimensions: 6.40 inch L x 1.10 inch H x 6.40 inch W, 10 AWG Wire, Terminals: 2 ft Leads

Features

• Patented QwikLug™ easily attaches to damaged or corroded spade connectors, quickly and easily solving the problem of a compressor with pitted or severely corroded spade terminals
• Clean damaged or corroded terminals
• Verify crimped connector is inserted into QwikLug™ body with spade pressed against the long flat side of the opening. Crimped connector fits between terminal and screw
• Slide QwikLug™ over terminal and tighten screw with Phillips screwdriver
• Attach QwikLug™ lead to the unit (leads not included with QT2800)
• Replaces damaged or corroded spade terminals
• Fits all standard compressor terminals
• Tightens from the front with a screwdriver
• Provides a durable brass connection - tested for more than 100,000 compressor starts
• Fully insulated brass connector
• 2 inch leads have been pre-stripped at the wire connection end
• 4 inch leads have fully insulated female connectors for connection directly to the contactor
• Fully insulated 4 inch leads with female connectors to link directly to the contactor

Resources

No product resources were supplied for this item.