Rheem® Endeavor® Line Classic® Series RHPXYB048AJT000NA Residential Packaged Heat Pump, 4 ton Nominal, 48000 Btu Cooling

Description

Rheem® Endeavor® Residential Packaged Heat Pump, Type: Constant Torque, Item: Residential Packaged Heat Pump, Line Classic® Series, 48000 Btu Cooling Capacity, 10.6 EER, 208/230 V, 1 ph Phase, Min. Circuit Amp: 35 A, 41 in H x 47-1/2 in W x 50-11/16 in D, 211 lb Weight, Warranty: 10 years Residential, 1 year for Parts, 5 years for Compressor Commercial, 45500 Btu Heating, R-454B Refrigerant, 1 x 16 x 30 in Filter, 50 Hz, 1/3 hp, Aluminum, 45 A Minimum Circuit, PSC Motor, Sound Rating: 80 dB, 1050 rpm, 4 ton Nominal Capacity, 13.4 SEER, Maximum Overcurrent Protection: 50 A, 1600 cfm Flow Rate, 6.7 HSPF

Features

• Scroll compressors on all models provides maximum efficiency and quiet operation
• Micro channel evaporator and condenser coil delivers superior performance with a robust surface, a decreased refrigerant requirement and is lighter than conventional copper tube/aluminum fin coils
• All aluminum construction offers superior protection against formicary corrosion and aluminum tube rubbing damage, the design allows for easier and faster cleaning
• Two thermal expansion valves - standard on all models for precise superheat control, reliability and energy efficiency at all operating conditions
• High and low pressure control - standard on all models for refrigerant component protection and reliability
• Filter drier - standard on all models
• 100% factory run tested
• PlusOne® Refrigerant Detection System™ - an integrated one box, patented design featuring the A2L sensor and mitigation board, offering easier commissioning with a single component and simplified wiring configuration, compatibility with any 24 V thermostat application and system protection by automatically pausing outdoor unit operation, if excess refrigerant is detected
• Rugged base rail contributes to improved installation and handling
• Easily accessible control box and slide-out blower section allows for faster installability and serviceability
• Double sloped evaporator coil drain pan allows for complete water removal from the unit - contributing to improved indoor air quality
• Louvered condenser compartment protects the coil against yard hazards and/or weather extremes
• Supply and return air openings feature a 1 in tall flange to prevent water migration into the ductwork
• Designing for sustainability with low GWP - for 2025, the Environmental Protection Agency (EPA) has set a global warming potential (GWP) limit of 700 for refrigerant used in heating and cooling systems
• This new requirement will result in a 78% lower GWP than previous generation refrigerants - with only minimal changes to system installation
• This is another step toward our continued sustainability goal of reducing greenhouse gas emissions, while still delivering an exceptional level of energy efficient, dependable comfort

Resources

No product resources were supplied for this item.