Rheem® Commercial Value 7.5 Ton 208/230 Volt 3 Phase Gas Package Unit

Description

Packaged Gas Electric Unit, Type: Commercial, Rooftop, AFUE: 81%, IEER Rating: 12.1, EER Rating: 11.2, Air Flow: 2800 cfm Nominal, 4500 cfm Outdoor Fan, Nominal Cooling Capacity: 90000 BTUH, Nominal Heating Capacity: 150000 MBH, Voltage Rating: 208 to 230 Volt, Frequency Rating: 60 Hertz, Horse Power: 6 HP Compressor Motor, 1/2 HP Outdoor Fan, 2 HP Indoor Fan, Sound Rating: 88 dB, Phase: 3, Recommended Breaker Size: 50A to 60A, Minimum Circuit Amperage: 40 Amps, Energy Star Certified: No, Refrigerant Type: R-410A, Refrigerant Charge: 117.6 ounce, Dimensions: 58.75 inch Width x 93.69 inch Depth x 44 inch Height, Filter Size: (6) 2 inch x 18 inch x 18 inch, Capacity in Tons: 7.5 Ton, Valve Type: Thermal Expansion, Single Stage Gas Valve, Filter Type: Disposable, Compressor Number/Type: 1/Scroll, Drive Package: Direct Drive, Motor Speed: 3450 rpm (Compressor), 1075 rpm (Outdoor Fan), 1725 rpm (Indoor Fan), Configuration: Convertible Airflow, Ignition System: Electric, Number of Speed: 1 (Outdoor Fan), 2 (Indoor Fan), AHRI Net Cooling Capacity: 84000 BTUH, Net Sensible Capacity: 64800 BTUH, Net Latent Capacity: 19200 BTUH, Weight: 882 lbs, Warranty: 10 year for Conditional Parts (Registration Required), 5 year for Compressor, 1 year Limited for Parts, Standards/Approvals: AHRI Certified, cULus Listed, ISO 9001:2008 Certified

Chances are, the last thing you think about is your building’s heating or cooling. You just expect it to keep your business comfortable. Rheem® has it covered with the finest commercial package gas electric units— in the industry—top-quality, innovative solutions in a variety of sizes and models to suit your company’s budget and needs.

Features

• There are single point electrical and gas connections on all models.
• Fixed restriction refrigerant flow control on 7.5 and 10 ton models.
• R-410A HFC refrigerant.
• Complete factory charged, wired and run tested.
• Scroll compressors with internal line break overload and high-pressure protection.
• Single stage compressor on 7.5 and 10 Ton models.
• Two stage compressor on 12.5 ton model.
• Convertible airflow.
• Fixed restriction refrigerant flow control on 7.5 and 10 ton models.
• TXV on 12.5 ton model.
• High Pressure and Low Pressure/Loss of charge protection standard on all models.
• Solid Core liquid line filter drier on each circuit.
• Single slab, single pass designed evaporator and condenser coils facilitate easy cleaning for maintained high efficiencies.
• Cooling operation up to 125 degree F ambient.
• MicroChannel Outdoor Coils.
• Foil faced insulation encapsulated throughout entire unit minimizes airborne fibers from the air stream.
• Access door with heavy-duty gasketing, and mechanically attached with 5/16" screws.
• Slide Out Indoor fan assembly for added service convenience.
• Powder Paint Finish meets ASTMB117 steel coated on each side for maximum protection. G90 galvanized.
• Forkable base rails for easy handling and lifting
• Single point electrical connections
• Condenser motors are internally protected, totally enclosed with shaft down design

Resources