Rheem® Commercial Classic® Series 180000 BTU Cooling 250000 BTU Heating 15 tons 460VAC 3-Phase R-410A Commercial High Efficiency Gas/Electric Rooftop Unit

Description

Gas/Electric Rooftop Unit, Series: Classic®, Type: High Efficiency, Commercial, EER Rating: 10.8, Air Flow: 6000 cfm Nominal, Nominal Cooling Capacity: 180000 BTU, Nominal Heating Capacity: 250000 BTU, Voltage Rating: 460VAC, Frequency Rating: 60 Hz, Horse Power: 3 HP Blower, 1/3 HP Condenser Motor, Sound Rating: 91 dBA, Phase: 3, Nominal RPM: 1075 rpm Condenser Motor, Refrigerant Type: R-410A, Temperature Rating: 125 Deg F Ambient, Dimensions: 88 inch W x 153 inch D x 59-1/2 inch H, Filter Size: (8) 2 inch x 25 inch x 20 inch, Capacity in Tons: 15, Minimum Circuit Amperage: 38A, Energy Star Certified: Yes, Valve Type: 1/4 Turn, Filter Type: Disposable, Compressor Number/Type: 2/Scroll, Drive Type: Belt, Ignition System: Electric, Blower Motor: 1725 rpm, AHRI Net Cooling Capacity: 172000 BTU, Net Sensible Capacity: 125700 BTU, Net Latent Capacity: 46300 BTU, Manufacturer Warranty: Limited Lifetime, Standards/Approvals: AHSI, cULus Certified, ASHRAE 90.1-2007

Features

• R-410A HFC refrigerant
• Complete factory charged, wired and run tested
• Scroll compressors with internal line break overload and high pressure protection
• Convertible airflow - vertical down flow or horizontal sideflow
• Forkable base rails for easy handling and lifting
• TXV refrigerant metering system on each circuit
• Solid core liquid line filter drier on each circuit
• Single slab, single pass designed evaporator and condenser coils facilitate easy cleaning for maintaining high efficiencies
• Foil faced insulation encapsulated throughout entire unit minimizes airborne fibers from the air stream
• Hinged major access door with heavy-duty gasketing, 1/4 turn latches and door retainers
• Slide out indoor fan assembly for added service convenience
• Base pan with drawn supply and return opening for superior water management
• High performance belt drive motor with variable pitch pulleys and quick adjust belt system
• Permanently lubricated evaporator, condenser and gas heat inducer motors
• Condenser motors are internally protected, totally enclosed with shaft down design
• Solid state furnace control with on board diagnostics
• 2-stage gas valve, direct spark ignition, and induced draft for efficiency and reliability
• 24V control system with resettable circuit breakers
• Colored and labeled wiring

Resources