Rheem® Commercial Classic 4 Ton 208/230 Volt 3 Phase Gas Electric Package Unit, Direct Drive

Description

Packaged Gas Electric Unit, Type: Commercial, Rooftop, AFUE: 81%, SEER Rating: 13, EER Rating: 11.5, Air Flow: 1600 cfm Nominal, 3680 cfm Outdoor Fan, Nominal Cooling Capacity: 48000 BTUH, Nominal Heating Capacity: 100000 MBH, Voltage Rating: 208 to 230 Volt, Frequency Rating: 60 Hertz, Horse Power: 4 HP Compressor, 1/3 HP Outdoor Fan, 1/2 HP Indoor Fan, Sound Rating: 78 dB, Phase: 3, Refrigerant Type: R-410A, Refrigerant Charge: 68 ounces, Recommended Breaker Size: 30A to 35A, Minimum Circuit Amperage: 22/22A, Energy Star Certified: Yes, Dimensions: 76-1/4 inch Length x 48-1/16 inch Depth x 35 inch Height, Filter Size: 1 inch x 16 inch x 25 inch, Capacity in Tons: 4 Ton, Valve Type: Thermal Expansion, Single Stage Gas Valve, Filter Type: Disposable, Compressor Number/Type: 1/Scroll, Drive Package: Direct Drive, Motor Speed: 3450 rpm (Compressor), 1075 rpm Condenser (Outdoor) Fan, 1075 rpm Evaporator (Indoor) Fan, Configuration: Convertible Airflow, Ignition System: Electric, Number of Speed: 1 (Outdoor Fan), 2 (Indoor Fan), AHRI Net Cooling Capacity: 46000 BTUH, Net Sensible Capacity: 34000 BTUH, Net Latent Capacity: 12000 BTUH, Manufacturers Warranty Length: 10 year for Conditional Parts (Registration Required), 5 year for Compressor, 1 year Limited for Parts, Standards/Approvals: AHRI Certified, cULus Listed, ISO 9001:2008 Certified

Chances are, the last thing you think about is your building’s heating or cooling. You just expect it to keep your business comfortable. Rheem® has it covered with the finest commercial package gas electric units— in the industry—top-quality, innovative solutions in a variety of sizes and models to suit your company’s budget and needs.

Features

• Complete factory charged, wired and run tested
• Scroll compressors with internal line break overload and high pressure protection
• Convertible airflow
• High pressure and low pressure/loss of charge protection standard on all models
• Solid core liquid line filter drier on each circuit
• Single slab, Micro channel designed evaporator coil facilitate easy cleaning for maintained high efficiencies
• Easily removable filter, blower, gas heat, and compressor/control access panels permits prompt service
• Powder paint finish meets ASTMB117 steel coated on each side for maximum protection. G90 galvanized
• 1-piece top cover and 1-piece base pan with drawn supply and return opening for superior water management
• Externally mounted refrigerant gauge ports for easy service diagnostics
• Easy to install plug-in, slip in, 100% fully modulating economizer
• Forkable base rails for easy handling and lifting
• Single point electrical and gas connections
• Direct drive motor with variable pitch pulleys and quick adjust belt system
• Permanently lubricated evaporator, condenser and gas heat inducer motors
• Condenser motors are internally protected, totally enclosed with shaft down design
• 1 inch filter standard with slide out design, will accept 2 inch filter
• 1-stage gas valve, direct spark ignition, and induced draft for efficiency and reliability
• Tubular heat exchange for long life and induced draft for efficiency and reliability, solid state furnace control with on board diagnostics, colored and labeled wiring, molded compressor plug
• Micro channel evaporators and condenser delivers superior performance with less refrigerant charge and less weight than conventional copper tube/aluminum fin coils. In addition the all aluminum design has superior formicary corrosion protection and less potential for leaks due to elimination of tube rubbing potential. It's easier to clean and has a more robust surface

Resources