Rheem® Commercial Value 4 Ton 460 Volt 3 Phase Gas Electric Package Unit,Belt Drive

Description

Packaged Gas Electric Unit, Type: Commercial, Rooftop, AFUE: 81%, IEER Rating: 12.5, EER Rating: 11.5, Air Flow: 2400 cfm Nominal, 4000 cfm Outdoor Fan, Nominal Cooling Capacity: 48000 BTUH, Voltage Rating: 460 Volt, Frequency Rating: 60 Hertz, Horse Power: 5 HP Compressor, 1/3 HP Outdoor Fan, 1.5 HP Indoor Fan, Sound Rating: 83 dB, Phase: 3, Refrigerant Type: R-410A, Refrigerant Charge: 70 ounces, Recommended Breaker Size: 20A to 20A, Minimum Circuit Amperage: 15 Amps, Energy Star Certified: Yes, Dimensions: 48.06 inch Width x 82.25 inch Depth x 35.13 inch Heigth, Filter Size: 2 inch x 16 inch x 16 inch(x 4), Capacity in Tons: 4 Ton, Valve Type: Thermal Expansion, Single Stage Gas Valve, Filter Type: Disposable, Compressor Number/Type: 1/Scroll, Drive Package: Standard, Drive Type: Belt Drive, Motor Speed: 3450 rpm (Compressor), 1075 rpm (Outdoor Fan), 1725 rpm (Indoor Fan), Configuration: Convertible Airflow, Ignition System: Electric, Number of Speed: 1 (Outdoor Fan), 2 (Indoor Fan), AHRI Net Cooling Capacity: 69000 BTUH, Net Sensible Capacity: 47300 BTUH, Net Latent Capacity: 21700 BTUH, Manufacturers Warranty Length: 10 year for Conditional Parts (Registration Required), 5 year for Compressor, 1 year Limited for Parts, Standards/Approvals: AHRI Certified, cULus Listed, ISO 9001:2008 Certified

Chances are, the last thing you think about is your building’s heating or cooling. You just expect it to keep your business comfortable. Rheem® has it covered with the finest commercial package gas electric units— in the industry—top-quality, innovative solutions in a variety of sizes and models to suit your company’s budget and needs.

Features

• R-410A HFC refrigerant.
• Complete factory charged, wired and run tested.
• Scroll compressors with internal line break overload and high-pressure protection.
• Single stage compressor on all models.
• Convertible airflow.
• TXV refrigerant metering system.
• High Pressure and Low Pressure/Loss of charge protection standard on all models.
• Solid Core liquid line filter drier.
• Single slab evaporator coil facilitate easy cleaning for maintained high efficiencies.
• Cooling operation up to 125 degree F ambient.
• Easily removable filter, blower, gas heat, and compressor/control access panels permits prompt service.
• Powder Paint Finish meets ASTMB117 steel coated on each side for maximum protection. G90 galvanized.
• One piece top cover and one piece base pan with drawn supply and return opening for superior water management.
• Externally mounted refrigerant gauge ports for easy service diagnostics.
• Easy to install plug-in; slip in, 100% fully modulating economizer.
• 82% of steady state efficiency
• Forkable base rails for easy handling and lifting.
• Single point electrical and gas connections.
• High performance belt drive motor with variable pitch pulleys and quick adjust belt system.
• Permanently lubricated evaporator, condenser and gas heat inducer motors.
• Condenser motor is internally protected, totally enclosed with shaft down design.
• 2 inch filter standard with slide out design.
• Single stage gas valve, direct spark ignition, and induced draft for efficiency and reliability.
• Tubular heat exchange for long life and induced draft for efficiency and reliability.
• Solid state furnace control with on board diagnostics.
• Colored and labeled wiring.
• Micro Channel coils.
• Molded compressor plug.
• Micro Channel evaporators and condenser delivers superior performance with less refrigerant charge and less weight than conventional copper tube/aluminum fin coils In addition the aluminum design has superior formicary corrosion protection and less potential for leaks due to elimination of tube rubbing potential. Its easier to clean and has a more robust surface.

Resources