SharkBite™ UXL115450FLF 2 inch Push Fit x FNPT Lead-Free Brass Adapter

Description

Adapter, Type: Lead-Free, Nominal Size: 2 inch, Connection Type: Push Fit x FNPT, Material: DZR Brass Body, Chloramine Resistant EDPM O-Ring, Copper Tube Liner, 316 Stainless Steel Grab Ring, Acetyl Copolymer SharkBite Cartridge Assembly, Pressure Rating: 200 psi, Temperature Rating: 20 - 200 Deg F, Dimensions: 2.97 inch, Applications: For use in Commercial and Residential Applications, Potable Water, Hydronic Heating, Chilled Water and General Water Distribution, Standards/Approvals: IAPMO IGC 157, NSF/ANSI 61, 372, ASSE 1061

Features

• Quick connect - no tools, soldering, clamps, unions or glue required. Cut pipe square, de-burr to remove rough edges/debris, mark the pipe for correct depth and push to get a pressure ready connection every time.
• Disconnect in seconds by sliding the demount tool down the pipe to engage the demount lugs and rotate clockwise to lock the open position leaving both hands free, you can now remove the pipe
• Safe-recessed release collar - commercial SharkBite require a special demount tool and cannot be accidentally disconnected/released
• Extensive range including slip feature on couplings and tee's - when repairing or tapping into existing pipe with push-fittings you must be able to either move the fitting or the pipe to ensure the pipe is engaged fully into the fitting
• Easy installation - unlike the tool intensive connection methods there is no need to send multiple fitters to a job, SharkBite commercial has been designed to be installed or removed by one person
• All fittings are lubricated for easy connection and by fitting the demount tool before engaging the pipe the force required can be reduced further. With the demount tool locked on you also have hands free disconnection
• Wet or dry - no waiting for copper tube to dry before soldering or glue to cure, SharkBite makes an instant connection in seconds
• No tools - unlike alterative tool intensive connections systems, SharkBite has no special tooling required for installation
• No time - fastest connection - cut-push-done, easy access to small or confined places, no flame - does not require re permit or re marshal
• No waste - should you make an error or simply want to change your installation, no problem for SharkBite. Simply remove and re-use (Fittings used for repeated testing must not be used in any permanent application)
• SharkBite commercial fitting are factory assembled and components cannot be removed
• Long pipe engagement provides pipe support against lateral pipe forces
• Lead-free dezincification resistance (DZR) brass - exceeds current no lead legislation - AB1953 or NSF372. Suitable for underground installation subject to local code authorities/inspectors
• Environmentally friendly - remove and re-use fittings, no need to be scrapped. No heat is required for installation

Resources

No product resources were supplied for this item.