Zurn® No-Hub Cast Iron Floor Drain Body With Type-N Strainer, 3 inch, Trap Primer, Dura-Coated

Description

Floor Drain Body, No-Hub, Dura-Coated Top Finish, 3 inch Pipe Dia., Trap Primer Connection, Cast Iron Drain, 7 to 9 inch Dia, 3-7/8 inch Height, Includes Type N Strainer

Features

• The Z415N Zurn Floor Drain can be installed in most floor construction. The drain pipe is run to an elevation below the expected finished floor level, so that the drain top will be flush with (or slightly below) the finished floor The drain body is secured to the pipe with any of four connections, Threaded, No-Hub, Inside Caulk or the Neo-Loc. The type of connection should be specified upon ordering any Zurn drain. Once the drain is set in place, the initial concrete sub-floor is poured to an elevation level with the top flange of the drain body. The waterproofing membrane is then run up to and over the flange. The invertible clamping collar is then placed on the drain and secured. The strainer is then screwed into the invertible clamping collar and finished floor is poured to finished grade

Resources

No product resources were supplied for this item.