Rheem® Endeavor® RH2VY4821STACNJ Line Air Handler, 4 ton, 13.4 to 14.3 SEER, R-454B, 3/4 hp, 60 Hz, 1 ph

Description

Rheem® Endeavor® Line Air Handler, Type: Standard Efficiency, Downflow, Horizontal Left, Horizontal Right, Upflow, 13.4 to 14.3 SEER, 2 Stages, Capacity in Tons: 4 ton, Position: Multi, 208-240 V, 60 Hz, Horse Power: 3/4 hp, 48000 Btu/hr Nominal Capacity, 1 ph Phase, 1024 to 1478 cfm Air Flow, Circuit Amperage: 7 A, 21 in Width, 7/8 in Suction Line, 3/8 in Liquid Line, 50-1/2 in Height, 21-11/16 in Depth, Constant CFM Motor, Max. Fuse Size: 15 A, Blower Motor: Yes, Rugged Steel, 20 x 20 in Filter, Motor Amps: 5.4 A, R-454B Refrigerant, Return Air Opening Depth: 19-3/4 in, Return Air Opening Width: 19-3/8 in, Electric Heat: Yes, Maximum Fuse Size: 15 A, Metering Device: TXV, Non-Communicating Controls, Warranty: 10 years, Limited, Standards/Approvals: AHRI Certified, cULus Listed, 128 lb Weight, 300 to 1300 rpm Speed, Coil Drain Connect: N-Coil, RH2VY Series

Features

• Constant CFM motor - when paired with EcoNet® smart thermostat, gradually auto-adjusts from low capacity to 100% of capacity to meet comfort requirements allowing for ultimate humidity control, quieter sounds levels and year round energy savings
• When paired with 24 V two-stage thermostat, air handler runs in two-speeds to match airflow with outdoor unit
• Quieter operation - provided by two-stage operation and truly variable speed airflow technology and sturdy cabinet construction with 1 in of foil faced insulation for quieter sound characteristics
• PlusOne® diagnostics - with the RUUD® contractor and EcoNet® apps, built-in EcoNet® and Bluetooth® technology makes monitoring, troubleshooting and repairing the product easier than ever before
• DIP switch-free installation commissioning via Bluetooth® technology - seamless final install step without DIP switch configuration using the RUUD® contractor app
• EcoNet® enabled air handler - the latest in sensor technology and the EcoNet® monitoring system provides a new level of protection, control and energy savings
• Allows on-the-go control and receipt of system alerts by the homeowner via the EcoNet® smart thermostat and EcoNet® app
• Aluminum indoor coil design - constructed of aluminum fins bonded to internally grooved aluminum tubing and are more corrosion-resistant
• Versatile 4-way convertible compact design - allow for up flow, downflow, horizontal left and horizontal right applications even in the smallest of spaces
• Rugged steel, compact cabinet construction - designed for added strength and versatility
• Field installed auxiliary heater kits - provide exact heat for indoor comfort and include circuit breakers which meet UL and cUL requirements for service disconnect
• Less than 2% cabinet air leakage at 1 in H2O - when tested in accordance with ASHRAE Standard 193
• Designing for sustainability with low GWP - for 2025, the Environmental Protection Agency (EPA) has set a global warming potential (GWP) limit of 700 for refrigerant used in heating and cooling systems
• This new requirement will result in a 78% lower GWP than previous generation refrigerants - with only minimal changes to system installation
• This is another step toward our continued sustainability goal of reducing greenhouse gas emissions, while still delivering an exceptional level of energy efficient, dependable comfort
• PlusOne® Refrigerant Detection System™ - an integrated one box, patented design featuring the A2L sensor and mitigation board, offering easier commissioning with a single component and simplified wiring configuration, compatibility with any 24 V thermostat application and system protection by automatically pausing outdoor unit operation, if excess refrigerant is detected

Resources