Rheem® RHGL R-410A 3-Phase Horizontal/Vertical Commercial Air Handler, 120000 BTUH, 10 tons

Description

Air Handler, Type: Horizontal/Vertical, Commercial, Nominal Capacity: 10 tons, Cooling Capacity: 120000 BTUH, Air Flow: 2600 cfm, Voltage Rating: 208 to 230/460VAC, Ampere Rating: 6.8A, Frequency Rating: 60 Hz, Phase: 3, Circuit Amperage: 15A, EER Rating: 11.4, Liquid Line Size: 7/8 inch, Length: 57-1/4 inch, Width: 56 inch, Height: 31-1/2 inch, Refrigerant: R-410A, Electric Heat: 20.2 to 29.6kW, Maximum Fuse Size: 15A, Stage: Single, Equipment Type: Straight Cool

Features

• Inherently protected motors are mounted inside of insulated cabinet to reduce motor noise
• Low profile allows for horizontal installation in most standard drop ceiling applications, and the movement of units through most standard doorways for addition or replacement work
• Thermal expansion valves -standard all models
• Filters - 1 inch throw away filters are standard, but filter racks are designed to accept either 1 inch or 2 inch filters
• Evaporator coil - two circuit, interlaced row split coils are constructed with copper tubes and aluminum fins mechanically bonded to the tubes for maximum heat transfer capabilities
• All coil assemblies are leak tested up to 450 psi (3100 kPa) internal pressure prior to installation into units
• Refrigerant connections - field piping connections are made through a fixed post between two side access panels on either side of the unit
• Units may be used with two straight cool condensing units or single circuit manifolded in the field using the copper fittings shipped with each unit
• RHGL air handler has not been tested, rated or certified to operate with dual remote heat pumps
• The galvanized steel drain pan is designed to trap condensate in either vertical or horizontal installations
• Condensate drain connections are located on both sides of the unit allowing complete flexibility to meet most field conditions
• Service access - 2 removable panels on top and each side of the unit are easily removed for access to motors, blowers, sheaves, and filters
• Horizontal or vertical - all models are designed for either application and can be installed in either position as supplied from the factory
• Cabinet-powder coat painted matching discharge plenums and decorative supply and return air grilles are available for use when units are to be installed within conditioned space
• A choice of motor horsepowers and drive combinations are available to allow you to meet specified CFM at various static pressures up to 2 inch (0.498 kPa) external static pressure
• Allows flexibility to meet most field conditions as well as full accessibility after the installation is complete

Resources