Rheem® RHGL 3-Phase R-410A Optional Drive Package Commercial Air Handler, 7.5 tons, 3000 cfm

Description

Air Handler, Type: Commercial, Nominal Capacity: 7.5 tons, Air Flow: 3000 cfm, Voltage Rating: 208/230/460V, Frequency Rating: 60 Hz, Horse Power: 1-1/2 HP, Phase: 3, RPM: 1725, Breaker Size: 15A max, Refrigerant: R-410A, Maximum Fuse Size: 15A, Blower Dimensions: 12 inch Dia x 12 inch W, Drive Package: Optional, Warranty: 1 yr Limited for Parts, Standards/Approvals: AHRI Certified, cULus Listed

Features

• Cabinet-Powder coat painted. Matching discharge plenums and decorative supply and return air grilles are available for use when units are to be installed within conditioned space
• Motor - Inherently protected motors are mounted inside of insulated cabinet to reduce motor noise. A choice of motor horsepowers and drive combinations are available to allow you to meet specified CFM at various static pressures up to 2 inch (0.498 kPa) external static pressure
• Thermal expansion valves - standard all models
• Filters- 1 inch throwaway filters are standard, but filter racks are designed to accept either 1 inch or 2 inch filters
• Evaporator Coil- 2 circuit, interlaced row split coils are constructed with copper tubes and aluminum fins mechanically bonded to the tubes for maximum heat transfer capabilities. All coil assemblies are leak tested up to 450 psig internal pressure prior to installation into units
• Refrigerant connections- field piping connections are made through a fixed post between two side access panels on either side of the unit. Allows flexibility to meet most field conditions as well as full accessibility after the installation is complete. Units may be used with two straight cool condensing units or single circuit manifolded in the field using the copper fittings shipped with each unit
• Drain pan- the galvanized steel drain pan is designed to trap condensate in either vertical or horizontal installations. Condensate drain connections are located on both sides of the unit allowing complete flexibility to meet most field conditions
• Service access- 2 removable panels on top and each side of the unit are easily removed for access to motors, blowers, sheaves, and filters
• Horizontal or vertical- all models are designed for either application and can be installed in either position as supplied from the factory
• Testing- all units are run tested at the factory prior to shipment. Units are shipped with a holding charge of nitrogen

Resources

No product resources were supplied for this item.