Rheem® RHSLHM6024JA 13 SEER Air Handler, 5 Ton, 1800 cfm, 24-1/2 inch x 55-1/2 inch x 21-11/16 inch

Description

Air Handler, 13 SEER, Nominal Capacity: 5 Ton, 208-230V Voltage Rating, Ampere Rating: 3A, 1 Phase, Frequency Rating: 60 Hz, Maximum Fuse Size: 15A, 1800 cfm CFM, 22-7/8 inch Return Air Opening Depth, 19-3/4 inch Return Air Opening Width, Suction Line Size: 3/8 inch, Liquid Line Size: 7/8 inch, 23 inch Supply Opening Width, 24-1/2 inch Width, 55-1/2 inch Height, 21-11/16 inch Depth, Standards: UL and cUL Listed, AHRI Certified

Features

• Traditional open wire element design for heat applications
• The most compact unit design available, all standard heat air handler models only 421/2 to 551/2 inches [1079 to 1409 mm] high
• Supply duct flanges provided as standard on air handler cabinet
• Rugged wall steel cabinet construction, designed for added strength and versatility
• Provisions for field electrical, connections available from either side or top of the air handler cabinet
• Molded polymer corrosion-resistant condensate drain pan is provided on all indoor coils
• Indoor coil design provides low air side pressure drop, high performance and extremely compact size
• Front refrigerant and drain connections
• Four leg blower motor mount
• Field convertible for vertical downflow, horizontal left hand or right hand air supply
• Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil
• Connection point for high voltage wiring is inside the air handler cabinet. Low voltage connection is made on the outside of the air handler cabinet
• Concentric knockouts are provided for power connection to cabinet. Installer may pull desired hole size up to 2 inches [51 mm] for 11/2 inch [38 mm] conduit
• Coils are constructed of aluminum fins bonded to internally grooved copper tubing
• Blower housing with controls, motor and blower. Slide out design for service and maintenance convenience
• Attractive pre-painted cabinet exterior
• 3 combustible floor base accessories fit all model sizes when required for downflow installations on combustible floors
• 1 inch foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance

Resources

No product resources were supplied for this item.